Step 1 - Install Edcast Standalone
Download Edcast Standalone software and install it.� This is a free application that can broadcast live audio to Icecast or Shoutcast servers.� Edcast doesn�t require any other software to operate (hence the name �Standalone�), and is ideal for 24/7 live streaming environments such as streaming an AM/FM station over the internet.
Link - Click Here to Download Edcast Standalone
Step 2 - Install the LAME MP3 Encoder
- (1, 2) Right click the link below and choose �Save As��
- Navigate to �C:\ Program Files \ edcast� and click �Save�.� It is VERY important that you save this file inside the actual Edcast program folder.
Step 3 - Start Edcast Standalone and configure the encoder
- (3) Click the �Add Encoder� button
- (4) Right-click the new encoder that appears below it
- (5) Choose �Configure� from the menu that appears
In the �Basic Settings� section, set up the encoder.
- (6) Enter your chosen bitrate - this must be equal or lower than the rate you purchased.
- (7) Enter your samplerate - Enter 44100 for bitrates above 96, or 22050 for streams below 96.
- (8) Number of channels - Enter 2 for bitrates above 48, choose 1 for bitrates below 48.
- (9) Select the �MP3 Lame� encoder
- (10) Select �Icecast2� for Icecast server, or �Shoutcast� for Shoutcast server.
- (11) Enter the host name of your server.
- (12) Enter the port number of your server.
- (13) Enter the DJ or Admin password of your server.
- (14) (Icecast2 only) Enter the mount point - this will usually be /live by default for SleepyEngineers Icecast2 servers.
- In the �YP Settings� section, enter your station details.
- Click �OK�
Step 5 - Start encoding
- (15) Tick the �AutoReconnect� box
- (16) Hilite the new encoder, then click the �Connect� button
- You should see information about the encoder status in the �Transfer Rate� column.� If it�s working properly, a numeric value will appear indicating the transmission speed.
Notes
- If you are unable to connect, go back to step 4 and double check every server setting.� You must also make sure there is music playing in Winamp.
- You can then select the audio device you wish to capture audio from - select it under �Live Recording�.
You�re now streaming live on the Internet!
�